Catalogue
Stainless Steel Products
Raw stainless in every form — sheets, coils, pipes and tubes, fittings, valves, bars and angles — mill-certified and stocked in Cairo. Every item is quoted on request: send the specification, get today's price.
Sheets & Plates
2B · BA · No.4 · Mirror · Checkered — ASTM A240, grades 201/304/316/310/430
View range →
Coils
Slit & full-width cold-rolled coils for production lines
View range →
Pipes & Tubes
Schedule & sanitary lines, welded and seamless — ASTM A312 · A270 · A554
View range →
Accessories & Fittings
Elbows, tees, reducers, flanges, unions, sockets, plugs, clamps & valves — every accessory a line needs
View range →
Valves
Ball, gate & butterfly valves for process lines
View range →
Bars
Round · square · hex · flat — ASTM A276, bright & mill finish
View range →
Angles
Equal angles, mill finish — structural & architectural
View range →Custom Cut & Fabrication
Slit coils, cut-to-size sheets, tanks, railings and fabricated parts — send your drawing or spec and get a formal offer.
Request a quote →Sheets & Plates
11
SS304 Checkered Sheet
SS304 checkered (tear-plate) anti-slip sheets — 14 sizes, 2–5 mm, 1×2 to 1.25×2.5 m, with mill test certificate. Cut-to-size on request.
SS304 Sheet 2B Mill
SS304 2B mill-finish sheets — 67 sizes, 0.4–6 mm thick, 1×2 up to 2×6 m, all with mill test certificate. Cut-to-size and laser cutting available.
SS304 Sheet BA Mirror
SS304 BA (bright annealed) mirror-finish sheets — 8 sizes, 1.5 mm, 1×2 and 1.25×2.5 m, PVC-protected, with mill test certificate.
SS304 Sheet No.4 Brushed
SS304 No.4 brushed (hairline) sheets — 22 sizes, 0.8–2 mm, 1×2 up to 2×4 m, PVC-protected, with mill test certificate.
SS310 Heat-Resistant Sheet
SS310 heat-resistant sheets for furnaces, kilns and high-temperature service — 6 sizes, 2–10 mm, with mill test certificate.
SS316 Sheet 2B Mill
SS316 2B mill-finish sheets for chemical, marine and food service — 41 sizes, 1–10 mm, 1.25×2.5 up to 2×4 m, with mill test certificate.
SS316 Sheet BA Mirror
SS316 BA mirror-finish sheet — 1×2 m, 2 mm, PVC-protected, with mill test certificate. Other sizes on request.
SS316 Sheet No.4 Brushed
SS316 No.4 brushed-finish sheets — 3 sizes, 2–3 mm, 1.25×2.5 and 1.5×3 m, with mill test certificate.
SS430 Sheet
SS430 ferritic (magnetic) sheets — the economical choice for appliances, decor and dry indoor use — 3 sizes, 0.8–1.5 mm, with mill test certificate.
Stainless Steel Plates
Hot-rolled plate 3–30 mm, No.1 finish, cut-to-size and laser cutting available. ASTM A240, grades 304/316.
Stainless Steel Wire Mesh
Woven and crimped stainless wire mesh, opening and wire diameter to your job — filters, sieves, guarding and façades. ASTM E2016.
Coils
1
Pipes & Tubes
7
SS201 Sanitary Tube
SS201 sanitary (round) tube — the economical choice for decor and light-duty work — 8 sizes, 10–38 mm, 1–2 mm wall, welded and seamless, with mill test certificate.
SS201 Schedule Pipe
SS201 schedule pipe, Sch 10 welded, 1″ and 5″ — an economical alternative for light structural and non-corrosive lines, with mill test certificate.
SS304 Sanitary Tube
SS304 sanitary tube for food, dairy and beverage lines — 56 sizes, 6.4–152 mm OD, 0.7–2 mm wall, welded and seamless, with mill test certificate.
SS304 Schedule Pipe
SS304 schedule pipe ASTM A312 — 64 sizes, ¼″ to 20″, Sch 10/40/80, seamless and welded, for pressure lines and structures, with mill test certificate.
SS316 Sanitary Tube
SS316 high-purity sanitary tube for pharmaceutical, chemical and food plants — 37 sizes, 6.35–127 mm OD, 1.25–2 mm wall, welded and seamless, with mill test certificate.
SS316 Schedule Pipe
SS316 schedule pipe ASTM A312 — 40 sizes, ½″ to 14″, Sch 10/40/80, seamless and welded, for acids, chlorides and marine service, with mill test certificate.
Stainless Steel Pipes (Schedule)
Schedule 5S–80 seamless and welded pipe, ½" to 12", grades 304/304L and 316/316L. ASTM A312 / ASME B36.19M.
Accessories & Fittings
9
Concentric Reducers
Butt-weld concentric reducers ¾"×½" to 8"×6". ASTM A403 / ASME B16.9.
Eccentric Reducers
Butt-weld eccentric reducers for pump suction and drain lines, ¾"×½" to 8"×6". ASTM A403.
Flanges
Slip-on, weld-neck, blind and lap-joint flanges, ½" to 12", PN10/16 and Class 150. ASTM A182 / ASME B16.5 / EN 1092-1.
Nipples
Hex and barrel nipples, Sch 40/80, ¼" to 4", BSP/NPT threads. ASTM A733.
Pipe Unions
Threaded and socket-weld unions, ¼" to 4", 3000 lb. ASTM A182 / ASME B16.11.
Plain Sockets (Couplings)
Full and half couplings, threaded BSP/NPT and socket-weld, ¼" to 4". ASME B16.11.
Stainless Steel Caps & Plugs
Hex-head, square-head and round plugs plus butt-weld caps, ¼" to 8". ASME B16.11 / B16.9.
Stainless Steel Elbows
45° and 90° butt-weld and threaded elbows, ½" to 8", long and short radius. ASTM A403 / ASME B16.9.
Stainless Steel Tees (Schedule)
Equal and reducing tees, butt-weld and threaded, ½" to 8". ASTM A403 / ASME B16.9.
Valves
3
Ball Valves
2-piece and 3-piece full-bore ball valves, threaded and tri-clamp, ¼" to 4", PN63. CF8M body, PTFE seats.
Butterfly Valves
Wafer and lug butterfly valves, 2" to 12", PN16, EPDM/PTFE seats, lever or gear operated.
Gate Valves
Rising-stem gate valves, flanged and threaded, ½" to 8", Class 150 / PN16. ASTM A351 CF8M.
Bars
3
Flat Bars
Flat bar 20×3 to 150×12 mm, mill and polished finish, 6 m lengths. ASTM A276 / A484.
Hexagonal Bars
Bright-drawn hex bar 8–60 mm A/F for machining and fasteners. ASTM A276 / A484.
Stainless Steel Square Bars (Solid)
Cold-drawn and hot-rolled square bar 8–100 mm, 6 m lengths. ASTM A276, grades 304/316.
Angles
1Browse by type or grade